Add to Favorites
Share

Single Stage Hot Coal Gas Gasifier

  • Description
Product Detail

    Single stage hot gas station 

    F1.5 m ~F4.0 m single stage coal gasifier

    SINGLE—;STAGE COAL GASIFIER TECHNICAL PARAMETER

    specification

    parameter item

    specification of coal-gasifier

    f1.5M

    f2.0M

    f2.4M

    f2.6M

    f3.0M

    f3.2M

    Gasifier body

    Dia.of chamber(mm)

    1500

    2000

    2400

    2600

    3000

    3200

    Chamber cross-section area(m2)

    1.767

    3.142

    4.524

    5.309

    7.068

    8.042

    fuel

    Max coal consumption(kg/h)

    500

    950

    1350

    1600

    2150

    2500

    species

    According to GB9143-88 standard;Anthracite?Non-caking coal?Lignite?Coking coal

    Coal particle size(mm)

    13~25,25~50

    Gas

    Theory output(Nm3/h)

    1150~1750

    2000~3150

    3000~5000

    4900~7000

    4900~7000

    5900~8000

    Heating value range(KJ/Nm3)

    5230~6060

    basic ingredient(%)

    CO:=25;H2:12~18;CH4:1~3;N2: 45~50;O2:0~0.4;CO2: 4~8

    function

    intensify of gasification(kg/m2h)

    anthracite:˜200 soft coal:˜300  coke:˜180

    rate of gasification(Nm3/kg)

    anthracite:3.0~3.5  soft coal:3.0~3.5  coke:˜4.0

    diameter of steam pocket * length(mm)

    f600×;1500

    f800×;1650

    f1000×;2200

    Technological process

    Drum air blower of air and the occurrence of a furnace body water clip 0.294mpa set of self-produced steam by the control valve, setting the ratio of mixed regulation merged into saturated air (gasifying agent), through the check valve into the furnace. In the furnace after at the bottom of the gas furnace grate uniform wind, the ash heat heating of the reverse downward into the fire gasification layer (1000 to 1200 DEG C) and hot carbon gasification reaction occurs, the heat of formation crude gas to new furnace coal drying and from the gas occurrence furnace outlet is derived, the exit gas temperature ranging from 500 to 600 DEG C, the main component for CO, H2, CO2, N2. Where CO and H2 are the active components of the gas, which belong to the heating gas, N2 is the air component of the gasification agent. Gasifier bed height is 1.3m ~ 1.8m, from top to bottom can be divided into ash layer, gasification layer, reaction layer, dry distillation layer. Into the furnace of coal after crushing, screening, size 13 ~ 25mm, 25 to 50, or 40 ~ 60mm, through the skew bridge by coal hoisting device added to double bell cover coalbox. The coal distributor into the furnace.

    Purification treatment

    By the gas occurrence furnace production of crude and hot gas (temperature of 500 to 600 DEG C) first by gravity dust collector, the large particle dust in the gas by weight part fall into the bottom tube, and then entered with the water seal isolation of cyclone further dust, the secondary dust removing gas by coal gas pipeline transported to gas.

    Single stage hot gas station process flow diagram

     

Send your message to this supplier
To:  

Zibo Yifeng Mechanical Engineering Co.,Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  

  
You May Like
Not exactly what you want? One request, multiple quotations Get Quotations Now >>